−13%Anemometer with Hot Wire Probe
Duct velocity and volume flow measurement for HVAC balancing and commissioning.
Buyer audits, boiler safety and the electrical load behind every shift.

Ready-made garments is the sector where measurement is most often audited by somebody other than the regulator. International buyers send their own inspectors, and those inspectors ask for calibration certificates by name.
The instruments that matter here are rarely exotic. They are the meters checking that a boiler gauge reads true, that a dyeing bath is at the temperature the recipe assumes, and that the switchboard feeding four hundred machines is not running hot.
Certificates with as-found values, stated uncertainty and traceability — the three things an auditor checks and the three most commonly missing.
Pressure gauges and temperature instruments verified against a reference, not against each other.
Insulation resistance, earth continuity and thermographic surveys of the distribution feeding production floors.
Temperature and humidity logging through dyeing, drying and finishing, so a failed batch can be explained.
Electrical, temperature and pressure instruments calibrated against traceable references, with as-found and as-left values on every certificate.
Learn moreInfrared survey of switchgear, motors and terminations under representative load, with every anomaly ranked by severity and a recommended timescale.
Learn moreThermographic surveys of switchgear and motors under representative load, with findings ranked by severity and timescale.
Learn more
−13%Duct velocity and volume flow measurement for HVAC balancing and commissioning.

Handheld pyranometer for PV commissioning and panel performance verification.

Class A logger for harmonics, flicker and voltage events across three phases.

Two-channel logger with one million reading memory for warehouse mapping studies.
−10%CAT IV 600 V multimeter with low-pass filter for variable speed drive measurement.

Handheld calibrator with built-in sensor and 24 V loop supply for live transmitter calibration.

Class A analyser logging harmonics, flicker, sags and swells across three phases with 8GB storage.

Portable dry well calibrator covering -30 to 155C with interchangeable inserts and 0.05C stability.